You've just filled the large holes around the home, but now your focus is on the mismatched skirting that's sticking out like a sore thumb?
Although it might just be a small crack or chip on the corner, it can detract from the overall appearance of a freshly renovated room. Give your furniture, artworks and accessories the perfect backdrop by replacing the skirting and filling in any gaps.
WATCH: How to replace skirting (plus some other handy hints!)
Although the skirting boards are down near the floor, it's a small detail that can either hide unsightly wall edges or magnify them. Over the years, abrasion, accidental knocks from furniture, or general wear and tear may have led to the need for its replacement.
Are there holes in the timber?**add in hyperlink once approved Or is the skirting starting to look uneven and untidy? Don't let this minor flaw detract from your freshly painted walls. Follow the easy steps below to replace the skirting yourself and spruce up any space.
• Skirting • Gap filler • Undercoat • Paint to match your skirting
Run a sharp utility knife along junction between skirting and wall to cut paint bridging them.
Using a hammer and chisel, pry up and remove any beading attached to skirting, such as the bead covering the gap to the floating floor here. Retain.
Pry up, remove and dispose of skirting.
Use a mitre saw to cut skirting with a 45° angle on the end to create a mitre join at external corner.
At internal corners, a scribed joint is best for neatness. Butt square piece of skirting right into corner. On second piece, cut a 45° angle through skirting (as if you were doing a mitred join) then use a coping saw to cut a line down from where this mitre begins. Butt this edge into face of first piece.
Run a bead of construction adhesive along back of skirting. Hold against wall and nail through skirting into wall. Fill nail holes using wood putty. Allow to dry and then sand smooth.
Re-nail extra bead to front of skirting.
Run a bead of gap filler along gap where skirting meets wall and also in any gaps at corners. Remove excess filler and use a damp cloth to smooth surface.
Using a paintbrush, undercoat and touch up paint on skirting as required, sanding between coats and allowing each one to dry.
How to install a skylight
Clever and stylish home office ideas
Plus, your chance to win
Plus, your chance to win
Treat yourself to a subscription-Save up to 25%